Please wait a minute...
涂料工业  2018, Vol. 48 Issue (3): 82-87    https://doi.org/10.12020/j.issn.0253-4312.2018.3.82
  科学视点 |
陶瓷涂层结构优化及失效机理的研究现状
周会会1,罗恒2
1. 公安消防部队高等专科学校,昆明 650208; 2. 昆明理工大学材料科学与工程学院,昆明 650093
Present status of structure optimization and failure mechanism on the ceramic coating
Zhou Huihui1,Luo Heng2
1. Public Security Fire Force College, Kunming 650208, China; 2. Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093,China
下载:  PDF (1216KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 陶瓷涂层以其优异的耐磨损、耐高温、耐腐蚀等性能表现出巨大的工程应用前景。但是,在服役过程中因温度变化和受力诱发的裂纹产生、扩展,甚至导致涂层开裂、剥落及失效,这些因素限制了涂层的应用,因此通过结构优化改善陶瓷涂层的抗开裂、剥落性能较为重要。本文首先论述了纳米结构涂层、耐磨多层涂层、复合涂层的失效机理及其结构优化。提出了利用单次喷涂制备粘结层和陶瓷层的方法,通过该方法可以消除陶瓷层与粘结层间的界面形态,提高涂层的断裂韧性、粘结强度。最后展望了陶瓷涂层在材料组分设计和工艺优化研究中应重点关注的方面。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
周会会
关键词:  陶瓷涂层  结构优化  复合涂层  多层涂层  失效机理  纳米涂层    
Abstract: Due to the excellent wear resistance, corrosion resistance as well as chemical stability at high temperature, the ceramic coating is widely applied in engineering setors. However, due to coating cracking, expansion, peeling and failure caused by temperature and stress change during the service process, the application of the ceramic coating is restricted. It is important to improve the anti-cracking and anti-peeling performance of the ceramic coatings through structural optimization. In this paper, the failure mechanism and structure optimization of the nano-structure coating, wear-resistant multi-layer coatings and composite coatings are discussed. The one-stop spraying method for preparation of the ceramic and adhesive coating is proposed, which can eliminate the interface defects and improve fracture toughness and adhesion. Finally, it focus on the structure design and optimization of ceramic coating.
Key words:  ceramic coating    structure optimization    composite coating    multilayer coating    failure mechanism    nanostructure coating
收稿日期:  2017-08-25      修回日期:  2017-12-29           出版日期:  2018-03-01      发布日期:  2018-05-23      期的出版日期:  2018-03-01
通讯作者:  周会会    E-mail:  1256312434@qq.com
引用本文:    
周会会, 罗恒. 陶瓷涂层结构优化及失效机理的研究现状[J]. 涂料工业, 2018, 48(3): 82-87.
Zhou Huihui, Luo Heng. Present status of structure optimization and failure mechanism on the ceramic coating . Paint & Coatings Industry, 2018, 48(3): 82-87.
链接本文:  
http://manu65.magtech.com.cn/Jwk3_tlgy/CN/10.12020/j.issn.0253-4312.2018.3.82  或          http://manu65.magtech.com.cn/Jwk3_tlgy/CN/Y2018/V48/I3/82
[1] HAYNES J A,FERBER M K,RIGNEY E D,et al.Mechanical properties and fracture behavior of interfacial alumina scales on plasma sprayed thermal barrier coatings[J].Materials at High Temperatures,1999,16(2):49-69.
[2] SZKODO M, BIEN A, ANTOSZKIEWICZ M. Effect of plasma sprayed and laser re-melted Al2O3 coatings on hardness and wear properties of stainess steel[J]. Ceramics International, 2016, 42(9): 11275-11285.
[3] WANG Y, STEPHEN J, WANG M D, et al. Abrasive wear characteristics of plasma sprayed nanostructured alumina titania coatings[J]. Wear,2000, 237(2):176-185.
[4] BANSAL P, PADTURE N P, VASILIEV A. Improved interfacial mechanical properties of Al2O3-13wt%TiO2 plasma-sprayed coatings derived from nanocrystalline powders[J]. Acta Materialia, 2003, 51(10):2959-2970.
[5] RODRIGUEZ J, RICO A, OTERO E, et al. Indentation properties of plasma sprayed Al2O3-13% TiO2 nanocoatings[J]. Acta Materialia, 2009, 57 (11):3148-3156.
[6] 倪立勇,孙宏飞,毕继鑫.等离子喷涂纳米陶瓷涂层的研究进展[J].材料保护,2008,41(4):44-46.
[7] 邓世均.热喷涂高性能陶瓷涂层[J].材料保护,1999,32(1):31-34.
[8] 刘英凯, 江斌, 辛俊峰,等.等离子喷涂陶瓷涂层的现状与应用[J].山东陶瓷,2009,32(1):19-22.
[9] 殷亚康, 孙耀宁.等离子喷涂陶瓷涂层的应用[J].电焊机,2015,45(2):132-136.
[10] 隋育松, 徐可君, 江龙平,等. 陶瓷涂层在航空发动机涡轮叶片表面处理中的应用[J]. 材料保护,2001, 34(3): 38-40.
[11] GHADAMI F, SOHI M H, GHADAMI S. Effect of bond coat and post-heat treatment on the adhesion of air plasma sprayed WC-Co coatings[J]. Surface and Coatings Technology, 2015, 261(15):289-294.
[12] WANG L, LIU C G, ZHONG X H, et al. Investigation of crack propagation behavior of atmospheric plasma-sprayed thermal barrier coating under uniaxial tension using the acoustic emission technique[J]. ASM International,2014, 24(3):296-308.
[13] ZHOU Y C, TONOMORIA T, YOSHIDA A, et al. Fracture characteristics of thermal barrier coatings after tensile and bending test[J]. Surface and Coatings Technology,2002, 157(2):118-127.
[14] WANG Y, TIAN W, YANG Y, et al. Investigation of stress field and failure mode of plasma sprayed Al2O3-13%TiO2 coatings under thermal shock[J]. Materials Science and Engineering A,2009, 516(2):103-108.
[15] YANG Y Y, MUNZ D, SCHALLER W. Effect of the stress jump at the interface of a joint on the failure behavior[J]. International journal of fracture, 1997, 87(4):113-118.
[16] ERDOGAN F. Fracture mechanics of functionaly graded materials[J]. Composites Engineering,1995, 5(7):753-770.
[17] KHOR K A, DONG Z L, GU Y W. Effects of residual stress on the performance of plasma sprayed functionally graded ZrO2/NiCoCrAlY coatings[J]. Materials Science and Engineering A,2000, 277(1):64-76.
[18] BAHR H A, BALKE H, FETT T, et al. Cracks in functionally graded materials[J]. Materials Science and Engineering,2003, 362(1):2-16.
[19] DEMIRKIRAN A S, AVCI E. Evaluation of functionally gradient coatings produced by plasma-spray technique[J]. Surface and Coatings Technology,1999,119(1):292-295.
[20] LIANG B, DING C X. Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying[J]. Surface and Coatings Technology, 2005, 197(2): 185-192.
[21] YANG Y, YAN D R, DONG Y C, et al. Preparing of nanostructured Al2O3-TiO2-ZrO2 composite powders and plasma spraying nanostructured composite coating[J]. Vacuum, 2013, 96(10):39-45.
[22] MATTHEWS A, LEYLAND A, HOLMBERG K, et al. Design aspects for advanced tribological surface coatings[J]. Surface and Coatings Technology, 1998,101(97):1-6.
[23] RENJI Z. Studies on multilayer wear of CVD TiC-TiN multilayer composite coating[J].Wear, 1991, 147(2):227-251.
[24] WIKLUND U, HEDENQVIST P, HOGMARK S. Multilayer cracking resistance in bending[J]. Surface and Coatings Technology,2008, 97(1): 773-778.
[25] ZHANG C, ZHOU H, LIU L. Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance[J]. Acta Materialia, 2014,72(7):239-251.
[26] CHAN K S, HE M Y, HUTCHINSON J W. Cracking and stress redistribution in ceramic layered composites[J]. Materials Science and Engineering,1993, 167(1): 57-64.
[27] ZHAO X L, XIE Z H, MUNROE P. Nanoindentation of hard multilayer coatings finite element modelling[J]. Materials Science and Engineering A,2011, 528(3):1111-1116.
[28] SUBRAMANIAN C, Strafford K N. Review of multicomponent multilayer coatings for tribological applications[J].Wear, 1993,165(1):85-95.
[29] SUBRAMANIAN C,Strafford K N.Towards optimization in the selection of surface coating and treatments to control wear in metal-forming dies and tools[J].Materials and Design, 1993,14(5):291-298.
[30] HOLLECK H. Multilayer PVD coatings for wear protection[J]. Surface and Coatings Technology, 1995, 76(1):328-336.
No related articles found!
[1] Zhang Guoliang, Ma Chunfeng, Zhang Guangzhao. Study on Permeable Coating for Anticorrosion of Concrete[J]. Paint & Coatings Industry, 2018, 48(1): 1 -5 .
[2] Luo Ping, Liu Zhaohui, Yang Hongbo, Shu Xin, Tao Rui, Zhang Yanan. Effect of Fusion Temperature on Properties of Al-SiC Silicate-Based Ceramic Coating[J]. Paint & Coatings Industry, 2018, 48(1): 6 -10 .
[3] Li Zijun, Liu Shenglin, Geng Gangqiang. Preparation of Polyaniline Microemulsion and Its Application in Waterborne Alkyd Coatings[J]. Paint & Coatings Industry, 2018, 48(1): 11 -16 .
[4] Wang Liuyang, Ye Mengxing, Wang Shan, Liu Fangfang. Preparation and Properties of Polyurethane/Urea Modified by Phenolic Resin[J]. Paint & Coatings Industry, 2018, 48(1): 17 -21 .
[5] Su Guohui, Tang Ying, Cai Wei. Preparation and Performance of Waterborne Sand-Containing Multicolor Coatings[J]. Paint & Coatings Industry, 2018, 48(1): 22 -27 .
[6] Li Yu, Wang Guoqing, Wan Yi, Ding Chunhua, Wang Aimin. Preparation of Silicone Oil Microcapsules with Bionic Antifouling Performance[J]. Paint & Coatings Industry, 2018, 48(1): 28 -36 .
[7] Li Yongyue, Yan Kun, Ma Jinghong, Gong Jinghua. Preparation of Low Friction Polyurethane Composite Coating by Blending[J]. Paint & Coatings Industry, 2018, 48(1): 37 -43 .
[8] Yuan Quan, Liu Huixian, Pan Qihui, Fang Zucheng, Jiang Shengbin, Yang Yucheng. Study on Preparation of UV-Cured Fiber Coatings with Ultra-Low Refractive Index[J]. Paint & Coatings Industry, 2018, 48(1): 44 -47 .
[9] Liu Wei, Su Minchao , Liu Xiaoxuan. Synthesis of Acrylate Resin Modified by Organic Silicon and UV-Curing Kinetics[J]. Paint & Coatings Industry, 2018, 48(1): 48 -53 .
[10] Qi Gang, An Qiufeng, Zhang Qiang. Study on Preparation and Properties of UV-Curable Nano Hybrid Fluorinated Silicone Resin[J]. Paint & Coatings Industry, 2018, 48(1): 54 -58 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed