Please wait a minute...
涂料工业  2018, Vol. 48 Issue (3): 28-33    https://doi.org/10.12020/j.issn.0253-4312.2018.3.28
  工艺技术 |
自乳化水性环氧固化剂的合成及性能
钱瑞1, 马尚权1, 赵建国2, 张进*2, 张姗姗2, 张童2
1. 华北科技学院安全工程学院,河北廊坊 065201; 2. 山西大同大学炭材料研究所,山西大同 037009
Synthesis and Properties of Self-Emulsified Waterborne Epoxy Curing Agent
Qian Rui1, Ma Shangquan1, Zhao Jianguo2, Zhang Jin2, Zhang Shanshan2, Zhang Tong2
1. College of Safety Engineering, North China Institute of Science and Technology, Langfang, Hebei 065201,China;
2. Carbon Materials Institute, Shanxi Datong University, Datong, Shanxi 037009,China
下载:  PDF (1501KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 采用单环氧化合物(AGE)为封端剂,环氧树脂(E44)为扩链剂,以三乙烯四胺(TETA)为原料,合成了一种具有自乳化效果的水性环氧固化剂。采用傅里叶变换红外光谱(FT-IR)对合成的水性环氧固化剂结构进行了表征,研究了合成条件对该水性固化剂成膜性质的影响。红外测试结果显示:环氧基团特征峰消失,环氧基全部参与了反应;涂膜性能测试表明:n(AGE)∶n(E44)∶n(TETA)=4.5∶1.0∶3.0时,醋酸成盐率为10%,所得涂膜外观、耐盐雾性能最佳。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
钱瑞
马尚权
张进
关键词:  水性环氧固化剂  三乙烯四胺  自乳化  环氧树脂    
Abstract: A novel self-emulsified waterborne epoxy curing agent was synthesized from single epoxy compound (AGE) as capping agent, the epoxy resin(E44) as chain extender and triethylene tetramine(TETA) as raw materials. The structure of the waterborne epoxy curing agent was characterized by Fourier transform infrared spectroscopy(FT-IR), and the effects of synthesis conditions on the film-forming properties of the waterborne curing agent were also studied. The infrared test results showed that the characteristic peaks of the epoxy group disappeared and the epoxy groups were all involved in the reaction. The film performance test showed that the molar ratio of n(AGE)∶n(E-44)∶n(TETA) was 45∶10∶30, the salifying ratio of acetic acid was 10%, the curing agent could provide excellent properties, such as film appearance, adhesion and salt fog resistance.
Key words:  waterborne epoxy curing agent    triethylenetetramine    self-emulsified    epoxy resin
收稿日期:  2017-12-20      修回日期:  2018-01-13           出版日期:  2018-03-01      发布日期:  2018-05-23      期的出版日期:  2018-03-01
基金资助: 华北科技学院科技基金项目资助
通讯作者:  张进    E-mail:  zhangjing8014484@163.com
引用本文:    
钱瑞, 马尚权, 赵建国, 张进, 张姗姗, 张童. 自乳化水性环氧固化剂的合成及性能[J]. 涂料工业, 2018, 48(3): 28-33.
Qian Rui, Ma Shangquan, Zhao Jianguo, Zhang Jin, Zhang Shanshan, Zhang Tong. Synthesis and Properties of Self-Emulsified Waterborne Epoxy Curing Agent. Paint & Coatings Industry, 2018, 48(3): 28-33.
链接本文:  
http://manu65.magtech.com.cn/Jwk3_tlgy/CN/10.12020/j.issn.0253-4312.2018.3.28  或          http://manu65.magtech.com.cn/Jwk3_tlgy/CN/Y2018/V48/I3/28
[1] 陈铤,施雪珍,顾国芳.双组分水性环氧树脂涂料[J].高分子通报, 2002, (6):63-70
[2] 杨振忠,许元泽.环氧树脂微粒化水基化体系[J].高分子通报, 1997, (3):190-194
[3] 段颖,伍青春,庄一鸣,等.新型非离子型水性环氧固化剂的制备[J].涂料工业, 2012, 42(1):32-35
[4] 周继亮,程新建,张道洪,等.含硅水性环氧固化剂的制备与性能[J].高分子材料科学与工程, 2013, 29(11):149-154
[5] 沈志军,张晖,刘刚,等.纳米及酚酞聚芳醚酮改性环氧复合材料性能[J].复合材料学报, 2014, 31(3):617-627
[6] 洪臻,王长松,梁兵,等.环氧树脂胺类固化剂的研究进展[J].化工新型材料, 2014, 42(8):12-15
[7] 陈培瑶,田澄,崔文柱,等.水性环氧树脂固化剂的制备及其涂膜性能研究[J].高分子通报, 2012, 25(12):62-67
[8] LU G Q, SUN J Z, ZHOU Q Y.Synthesis and characterization of waterborne epoxy curing agent modified by silane[J].Chin J Chem Eng, 2007, 15(6):899-905
[9] GLASS J E.Technology for Waterborne Coatings[M]. Washington D C: American Chemical Society,1997.
[10] KOJIMA S, WATANABE Y.Development of high performance waterborne coatings PartⅠ:emulsification of epoxy resin[J].Polymer Engineering and Science, 1993, 33(5):253-259
[11] 刘志远,朱亚君,王留方,等.非离子型水性环氧树脂固化剂的合成与性能研究[J].涂料工业, 2010, 40(10):47-51
[12] 李楚新,吴超富,熊远钦,等.水性环氧树脂固化剂研究进展[J].热固性树脂, 2006, (21):9-11
[13] 王丰,刘娅莉,徐龙贵,等.水性环氧涂料固化剂研究进展[J].涂料工业, 2004, 34(8):29-33
[14] 刘晓芳,王伟荣,魏铭,等.非离子型自乳化水性环氧固化剂的制备、性能及固化机理研究[J].涂料工业, 2017, 47(5):44-50
[15] 倪维良.水性环氧固化剂的合成及应用性能研究[D]. 东营:中国石油大学, 2011.
No related articles found!
[1] Zhang Guoliang, Ma Chunfeng, Zhang Guangzhao. Study on Permeable Coating for Anticorrosion of Concrete[J]. Paint & Coatings Industry, 2018, 48(1): 1 -5 .
[2] Luo Ping, Liu Zhaohui, Yang Hongbo, Shu Xin, Tao Rui, Zhang Yanan. Effect of Fusion Temperature on Properties of Al-SiC Silicate-Based Ceramic Coating[J]. Paint & Coatings Industry, 2018, 48(1): 6 -10 .
[3] Li Zijun, Liu Shenglin, Geng Gangqiang. Preparation of Polyaniline Microemulsion and Its Application in Waterborne Alkyd Coatings[J]. Paint & Coatings Industry, 2018, 48(1): 11 -16 .
[4] Wang Liuyang, Ye Mengxing, Wang Shan, Liu Fangfang. Preparation and Properties of Polyurethane/Urea Modified by Phenolic Resin[J]. Paint & Coatings Industry, 2018, 48(1): 17 -21 .
[5] Su Guohui, Tang Ying, Cai Wei. Preparation and Performance of Waterborne Sand-Containing Multicolor Coatings[J]. Paint & Coatings Industry, 2018, 48(1): 22 -27 .
[6] Li Yu, Wang Guoqing, Wan Yi, Ding Chunhua, Wang Aimin. Preparation of Silicone Oil Microcapsules with Bionic Antifouling Performance[J]. Paint & Coatings Industry, 2018, 48(1): 28 -36 .
[7] Li Yongyue, Yan Kun, Ma Jinghong, Gong Jinghua. Preparation of Low Friction Polyurethane Composite Coating by Blending[J]. Paint & Coatings Industry, 2018, 48(1): 37 -43 .
[8] Yuan Quan, Liu Huixian, Pan Qihui, Fang Zucheng, Jiang Shengbin, Yang Yucheng. Study on Preparation of UV-Cured Fiber Coatings with Ultra-Low Refractive Index[J]. Paint & Coatings Industry, 2018, 48(1): 44 -47 .
[9] Liu Wei, Su Minchao , Liu Xiaoxuan. Synthesis of Acrylate Resin Modified by Organic Silicon and UV-Curing Kinetics[J]. Paint & Coatings Industry, 2018, 48(1): 48 -53 .
[10] Qi Gang, An Qiufeng, Zhang Qiang. Study on Preparation and Properties of UV-Curable Nano Hybrid Fluorinated Silicone Resin[J]. Paint & Coatings Industry, 2018, 48(1): 54 -58 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed